Your water heater is one of the used and more expensive appliances in your home, and consumes a large involving your energy dollars each month. And experts say regular care and maintenance is essential to protecting your investment and saving around the home heating and costs.
Regular flushing of one’s water heater are probably the single most important step you consider to prolong its service life and even save energy. Over a period of time, sediments amass in the bottom of your hot water heater. These sediments act as a barrier between the flame and the tank, thereby making your heater burn longer and hotter. This is not just destructive to the tank, but highly inefficient and will significantly raise your heating costs.
In most regarding the country, the average water heater lasts 3-5 years. Regularly flushing your water heater can double existence of your water heater from 3-5 to 7-10 years. To provide a source costs of replacement running from $700 to over $1200 in some cases, getting the most from your heater is in today’s economy. In addition, regular flushing makes your hot water heater run more efficiently and can cut heating costs fifty percent. Depending on the volume of drinking water your home uses, that can mean a savings of $20 to over $50 a week.
To drain your water heater, you can find should set the thermostat to pilot (if it can be a gas water heater) or turn the circuit breaker off (if it is definitely an electric heater). Failure to do so could result in overheating and severe damage to the actual heater. Next, close the water supply valve located over the water inlet line going into your water heater. Then you’re connect a hose to the drain valve located at the bottom of the space heater. Open the drain and allow it working out until all of the water has emptied from the heating unit. Then close the drain. Open the water supply valve and refill the heating. You should also open a hot water faucet somewhere indoors and stand there and watch it run for several minutes until the water flows out quickly. This will allow air to vent off of the heater and the water lines. Finally, you can turn the thermostat to be able to its regular setting (for a gas heater), or turn the circuit breakers back on (for an electric heater).
Besides regularly flushing your water heater, plumbing experts also advise adding a water treatment system to your residence to filter or condition the water so is certainly less corrosive to your plumbing system, particularly in areas which have hard wetness. For more ways to care for and protect your home plumbing system, contact a licensed, professional plumbing contractor in region to discuss options and merchandise to suit your needs.
Abacus Plumbing, Air Conditioning & Electrical
The Woodlands, TX
(281) 528-1610